California Institute of Technology
Engineering Design Research Laboratory
Bibliography

Erik K. Antonsson, Ph.D., P.E.
Professor of Mechanical Engineering 
Division of Engineering and Applied Science 
California Institute of Technology 
Pasadena, California 91125 

June 4, 2011

09s
Grote, K.-H., and Antonsson, E. K., Eds.
Springer Handbook of Mechanical Engineering, 1st ed.
Springer, Berlin, New York, 2009.
Abstract in HTML. Full version in PDF.
09f
Yogev, O., Shapiro, A. A., and Antonsson, E. K.
A Novel Energy-Based Approach for Merging Finite Elements.
International Journal for Numerical Methods in Engineering (2010).
Published online: 11-Jul-2010.
Abstract in HTML. Full version in PDF.
09d
Roy, A., Antonsson, E. K., and Shapiro, A. A.
Genetic Evolution for the Development of Robust Artificial Neural Network Logic Gates.
In International Design Engineering Technical Conferences, 35th Design Automation Conference (Sept. 2009), ASME, pp. 123–130.
Paper Number: DETC2009-87448.
Abstract in HTML. Full version in PDF.
08i
Yogev, O., Shapiro, A. A., and Antonsson, E. K.
Computational Evolutionary Embryogeny.
IEEE Transactions on Evolutionary Computation 14, 2 (Apr. 2010), 301–325.
Published Online: October 30, 2009.
Abstract in HTML. Full version in PDF.
08g
Yogev, O., Shapiro, A. A., and Antonsson, E. K.
A Novel Evolutionary Method for Synthesis of 3D Continuous Structures.
In Proceedings of the 9th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA08) (July 2008), ASME.
Paper Number: ESDA008/DTM-59036.
Abstract in HTML. Full version in PDF.
08e
Yogev, O., Shapiro, A. A., and Antonsson, E. K.
Engineering by Fundamental Elements of Evolution.
In 20th International Conference on Design Theory and Methodology (DTM) (Aug. 2008), ASME.
Abstract in HTML. Full version in PDF.
08d
Yogev, O., Shapiro, A. A., and Antonsson, E. K.
Modularity and Symmetry in Computational Embryogeny.
In GECCO 2008, Genetic and Evolutionary Computation Conference (Atlanta, GA, July 2008).
Abstract in HTML. Full version in PDF.
08c
Yogev, O., Shapiro, A. A., and Antonsson, E. K.
Growth Control and Disease Mechanisms in Computational Embryogeny.
In GECCO 2008, Genetic and Evolutionary Computation Conference (Atlanta, GA, July 2008).
Abstract in HTML. Full version in PDF.
08b
Roy, A., Antonsson, E. K., and Shapiro, A. A.
Genetic Programing of an Artificial Neural Network for Robust Control of a 2-D Path Following Robot.
In 20th International Conference on Design Theory and Methodology (DTM) (Sept. 2008), ASME.
Abstract in HTML. Full version in PDF.
08a
Roy, A., Antonsson, E. K., and Shapiro, A. A.
The Evolution of Robust Artificial Neural Network Logic Gates by Using Genetic Programming.
In GECCO 2008, Genetic and Evolutionary Computation Conference (Atlanta, GA, July 2008).
Abstract in HTML. Full version in PDF.
07w
Wang, B.
Information-Theoretic Methods for Modularity in Engineering Design.
PhD thesis, California Institute of Technology, Pasadena, CA, June 2007.
Abstract in HTML. Full version in PDF.
07t
Honda, T.
Formalization and Applications of Grayscale Reliability Analysis for Engineering Design.
PhD thesis, California Institute of Technology, Pasadena, CA, Sept. 2007.
Abstract in HTML. Full version in PDF.
07n
Nicaise, F.
Automated Design Synthesis of Structures Using Growth Enhanced Evolution.
PhD thesis, California Institute of Technology, Pasadena, CA, Dec. 2007.
Abstract in HTML. Full version in PDF.
07f
Yogev, O., Shapiro, A. A., and Antonsson, E. K.
A General Finite Element Merging Method for 3-D Meshes.
International Journal for Numerical Methods in Engineering (2010).
Abstract in HTML. Full version in PDF.
07d
Alvarez, R. M., and Antonsson, E. K.
Bridging Science, Technology, and Politics in Election Systems.
The Bridge 37, 2 (Summer 2007), 6–10.
Invited paper. Presented at the National Academy of Engineering, 2007 National Meeting Symposium, The Impact of Technology on Voting and Elections in the 21st Century, Irvine, CA, February 8, 2007, in honor of Bill Wulf on the occasion of his retirement as president of the NAE.
Abstract in HTML. Full version in PDF.
07c
Yogev, O., and Antonsson, E. K.
A Novel Synthesis Design Approach for Continuous Inhomogeneous Structures.
In 19th International Conference on Design Theory and Methodology (DTM) (Sept. 2007), ASME.
Paper Number: DETC2007/DTM-35662.
Abstract in HTML. Full version in PDF.
07b
Honda, T., and Antonsson, E. K.
Coupling Effects and Sensitivity Analysis for Grayscale System Reliability.
In 19th International Conference on Design Theory and Methodology (DTM) (Sept. 2007), ASME.
Paper Number: DETC2007/DTM-35673.
Abstract in HTML. Full version in PDF.
07a
Nicaise, F., and Antonsson, E. K.
Indirect Encoding of Structures for Evolutionary Design.
In 33rd Design Automation Conference (DAC) (Sept. 2007), ASME.
Paper Number: DETC2007/DAC-35307.
Abstract in HTML. Full version in PDF.
06z
Zhang, Y.
Engineering Design Synthesis of Sensor and Control Systems for Intelligent Vehicles.
PhD thesis, California Institute of Technology, Pasadena, CA, June 2006.
Abstract in HTML. Full version in PDF.
06e
Yogev, O., and Antonsson, E. K.
Growth and Development of Continuous Structures.
In GECCO 2007, Genetic and Evolutionary Computation Conference (London, UK, 2007), pp. 1064–1065.
Abstract in HTML. Full version in PDF.
06d
Yogev, O., and Antonsson, E. K.
Evolution of Continuous Structures.
In 16th International Conference on Engineering Design (ICED) (Aug. 2007), The Design Society.
Abstract in HTML. Full version in PDF.
06c
Honda, T., and Antonsson, E. K.
Grayscale System Reliability: Assessment of Degradation, Reliability, and Lifetime in Engineering Design.
In 16th International Conference on Engineering Design (ICED) (Aug. 2007), The Design Society.
Abstract in HTML. Full version in PDF.
06a
Zhang, Y., Antonsson, E. K., and Grote, K.
A New Threat Assessment Measure for Collision Avoidance Systems.
In 9th International IEEE Conference on Intelligent Transportation Systems (ITSC 2006) (Sept. 2006), U. Nunes, Ed., IEEE.
Abstract in HTML. Full version in PDF.
05d
Nicaise, F., and Antonsson, E. K.
Biological Inspirations for Improving Evolutionary Computations.
In Adaptive Computing in Design and Manufacture (ACDM 2006) (Bristol, UK, Apr. 2006), I. Parmee, Ed., University of the West of England.
Abstract in HTML. Full version in PDF.
05amsa
Antonsson, E. K., and Gombosi, T.
Advanced Modeling, Simulation and Analysis.
In Science Mission Directorate Technology Capability Portfolio, H. Thronson and G. Varsi, Eds. National Aeronautics and Space Administration, Washington, DC, Dec. 2005, ch. 14.
Publication No. JPL 05-10.
Abstract in HTML. Full version in PDF.
05stp
Antonsson, E. K., and Lemmerman, L. A.
Strategic Technology Plan.
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, June 2005.
Publication No. JPL 400-1203.
Abstract in HTML. Full version in PDF.
05b
Wang, B., and Antonsson, E. K.
Hierarchical Modularity: Decomposition of Function Structures with Minimal Description Length Principle.
In 17th International Conference on Design Theory and Methodology (DTM) (Sept. 2005), ASME.
Paper Number: DETC2005-85173.
Abstract in HTML. Full version in PDF.
05a
Honda, T., Nicaise, F., and Antonsson, E. K.
Synthesis of Structural Symmetry Driven by Cost Saving.
In 31st Design Automation Conference (DAC) (Sept. 2005), ASME.
Paper Number: DETC2005-85111.
Abstract in HTML. Full version in PDF.
04h
Antonsson, E. K., Nicaise, F., and Honda, T.
Configuration Synthesis of a Variable Complexity Truss.
In 15th International Conference on Engineering Design (ICED) (Aug. 2005), A. Samuel, Ed., The Design Society.
Abstract in HTML. Full version in PDF.
04g
Zhang, Y., Antonsson, E. K., and Martinoli, A.
Evolving Neural Controllers for Collective Robotic Inspection.
In 9th Online World Conference on Soft Computing in Industrial Applications (Sept. 2004), World Federation on Soft Computing (WFSC).
Abstract in HTML. Full version in PDF.
04e
Wang, B., and Antonsson, E. K.
Information Measure for Modularity in Engineering Design.
In 16th International Conference on Design Theory and Methodology (DTM) (Sept. 2004), ASME.
Paper Number: DETC2004-57515.
Abstract in HTML. Full version in PDF.
03f
Antonsson, E. K., and Sebastian, H.-J.
Fuzzy Fitness Functions Applied to Engineering Design Problems.
European Journal of Operational Research 166, 3 (Nov. 2005), 794–811.
Invited paper. Feature Issue of EJOR on Advances in Complex Systems Modeling.
Abstract in HTML. Full version in PDF.
03c
Zhang, Y., Antonsson, E. K., and Martinoli, A.
Evolutionary Engineering Design Synthesis of On-Board Traffic Monitoring Sensors.
Research in Engineering Design 19, 2-3 (2008), 113–125.
Abstract in HTML. Full version in PDF.
03b
Antonsson, E. K., Zhang, Y., and Martinoli, A.
Evolving Engineering Design Tradeoffs.
In 15th International Conference on Design Theory and Methodology (DTM) (Sept. 2003), ASME.
Paper no. DETC2003/DTM-48676.
Abstract in HTML. Full version in PDF.
03a
Honda, T., and Antonsson, E. K.
Preferences and Correlated Uncertainties in Engineering Design.
In 15th International Conference on Design Theory and Methodology (DTM) (Sept. 2003), ASME.
Paper no. DETC2003/DTM-48674.
Abstract in HTML. Full version in PDF.
02l
Lee, C.-Y.
Efficient Automatic Engineering Design Synthesis through Evolutionary Exploration.
PhD thesis, California Institute of Technology, Pasadena, CA, June 2002.
Abstract in HTML. Full version in PDF.
02g
Lipson, H., Antonsson, E. K., and Koza, J. R., Eds.
Computational Synthesis: From Basic Building Blocks to High Level Functionality.
AAAI Spring Symposium Series. AAAI Press, Menlo Park, CA, March 24-26 2003.
Technical Report SS-03-02.
Abstract in HTML. Full version in PDF.
02f
Zhang, Y., Martinoli, A., Antonsson, E. K., and Olney, R. D.
Evolution of Sensory Configurations for Intelligent Vehicles.
In IEEE Intelligent Vehicles Symposium (Columbus, OH, June 2003), S. Tsugawa, Ed., IEEE, pp. 351–356.
Abstract in HTML. Full version in PDF.
02e
Zhang, Y., Martinoli, A., and Antonsson, E. K.
Evolutionary Design of a Collective Sensory System.
In Computational Synthesis: From Basic Building Blocks to High Level Functionality (Menlo Park, CA, March 24-26 2003), H. Lipson, E. K. Antonsson, and J. R. Koza, Eds., AAAI Spring Symposium Series, The American Association for Artificial Intelligence, AAAI Press, pp. 283–290.
Technical Report SS-03-02.
Abstract in HTML. Full version in PDF.
02d
Martinoli, A., Zhang, Y., Prakash, P., Antonsson, E. K., and Olney, R. D.
Towards Evolutionary Design of Intelligent Transportation Systems.
In Proceedings of the Eleventh International Symposium of the Associazione Tecnica dell’Automobile on Advanced Technologies for ADAS Systems (Siena, Italy, 2002), S. R. Fiorentin, Ed., ATA, pp. –.
Paper Number 02A009.
Abstract in HTML. Full version in PDF.
02b
Lee, C.-Y., and Antonsson, E. K.
Neural Network Design through Embedded Representations and Evolutionary Computation.
In IJCNN 2002, International Joint Conference on Neural Networks (Honolulu, Hawaii, 2002).
Abstract in HTML. Full version in PDF.
02a
Lee, C.-Y., and Antonsson, E. K.
Reinforcement Learning in Steady-State Cellular Genetic Algorithms.
In CEC 2002, Congress on Evolutionary Computation (Honolulu, Hawaii, 2002).
Abstract in HTML. Full version in PDF.
01v
Ansolabehere, S., Palfrey, T., Stewart, C., Alvarez, R. M., Rivest, R., Bruck, J., Selker, T., and Antonsson, E. K.
Voting - What Is, What Could Be.
California Institute of Technology, Pasadena, CA, July 2001.
Caltech-MIT Voting Technology Project Report.
Abstract in HTML. Full version in PDF.
01m
Ma, L.
Robust Mask-layout and Process Synthesis in Micro-Electro-Mechanical-Systems (MEMS) Using Genetic Algorithms.
PhD thesis, California Institute of Technology, Pasadena, CA, June 2001.
Abstract in HTML. Full version in PDF.
01a
Lee, C.-Y., and Antonsson, E. K.
Adaptive Evolvability via Non-Coding Segment Induced Linkage.
In GECCO 2001, Genetic and Evolutionary Computation Conference (San Francisco, CA, 2001).
Abstract in HTML. Full version in PDF.
00z
Antonsson, E. K., and Cagan, J., Eds.
Formal Engineering Design Synthesis.
Cambridge University Press, Cambridge, U.K., 2001.
Abstract in HTML. Full version in PDF.
00y
Lee, C.-Y., Ma, L., and Antonsson, E. K.
Evolutionary and Adaptive Synthesis Methods.
In Formal Engineering Design Synthesis, E. K. Antonsson and J. Cagan, Eds. Cambridge University Press, Cambridge, U.K., 2001, ch. 8, pp. 270–320.
Abstract in HTML. Full version in PDF.
00x
Antonsson, E. K.
Microsystem Design Synthesis.
In Formal Engineering Design Synthesis, E. K. Antonsson and J. Cagan, Eds. Cambridge University Press, Cambridge, U.K., 2001, ch. 5, pp. 126–169.
Abstract in HTML. Full version in PDF.
00j
Lee, C.-Y., and Antonsson, E. K.
A Pareto Optimal Approach to Takagi-Sugeno Fuzzy Systems Design.
IEEE Transactions on Fuzzy Systems (2001).
Abstract in HTML. Full version in PDF.
00i
Lee, C.-Y., and Antonsson, E. K.
Mask-Layout Synthesis Using a Level Sets Simulator.
In MSM’2001, Modeling and Simulation of Microsystems, Semiconductors, Sensors and Actuators (One Kendall Square, Cambridge, MA, U.S.A., Mar. 2001), Applied Computational Research Society.
International Conference on Modeling and Simulation of Microsystems.
Abstract in HTML. Full version in PDF.
00h
Ma, L., and Antonsson, E. K.
Robust Mask-Layout Synthesis for MEMS.
In MSM’2001, Modeling and Simulation of Microsystems, Semiconductors, Sensors and Actuators (One Kendall Square, Cambridge, MA, U.S.A., Mar. 2001), Applied Computational Research Society.
International Conference on Modeling and Simulation of Microsystems.
Abstract in HTML. Full version in PDF.
00g
Lee, C.-Y., and Antonsson, E. K.
Dynamic Partitional Clustering using Evolution Strategies.
In SEAL’2000, Proceedings of the Third Asia Pacific Conference on Simulated Evolution and Learning (Nagoya, Japan, Oct. 2000), IEEE.
Abstract in HTML. Full version in PDF.
00f
Ma, L., and Antonsson, E. K.
Robust Mask-Layout and Process Synthesis.
Journal of Microelectomechanical Systems 12, 4 (Aug. 2003).
Abstract in HTML. Full version in PDF.
00e
Ma, L., and Antonsson, E. K.
Applying Genetic Algorithms to MEMS Synthesis.
In ASME International Mechanical Engineering Congress and Exposition (Orlando, FL, Nov. 2000), ASME.
Abstract in HTML. Full version in PDF.
00d
Cirak, F., Scott, M. J., Antonsson, E. K., , Ortiz, M., and Schröder, P.
Integrated Modeling, Finite-Element Analysis, and Engineering Design for Thin-Shell Structures using Subdivision.
Computer-Aided Design 34, 2 (2002), 137 – 148.
Abstract in HTML. Full version in PDF.
00c
Lee, C.-Y., and Antonsson, E. K.
Variable Length Genomes for Evolutionary Algorithms.
In GECCO 2000, Proceedings of the Genetic and Evolutionary Computation Conference (July 2000), IEEE, Morgan Kaufmann, p. 806.
Abstract in HTML. Full version in PDF.
00b
Scott, M. J., and Antonsson, E. K.
Using Indifference Points in Engineering Decisions.
In 11th International Conference on Design Theory and Methodology (DTM) (Sept. 2000), ASME.
Abstract in HTML. Full version in PDF.
99l
Li, H.
Evolutionary Techniques Applied to Mask-layout Synthesis in Micro-Mechanical-Electronic Systems (MEMS).
PhD thesis, California Institute of Technology, Pasadena, CA, June 1999.
Abstract in HTML. Full version in PDF.
99h
Lee, C.-Y., and Antonsson, E. K.
Self-Adapting Vertices for Mask Synthesis.
In MSM’2000, Modeling and Simulation of Microsystems, Semiconductors, Sensors and Actuators (One Kendall Square, Cambridge, MA, U.S.A., Apr. 2000), Applied Computational Research Society.
International Conference on Modeling and Simulation of Microsystems.
Abstract in HTML. Full version in PDF.
99g
Ma, L., and Antonsson, E. K.
Mask-Layout and Process Synthesis for MEMS.
In MSM’2000, Modeling and Simulation of Microsystems, Semiconductors, Sensors and Actuators (One Kendall Square, Cambridge, MA, U.S.A., Apr. 2000), Applied Computational Research Society.
International Conference on Modeling and Simulation of Microsystems.
Abstract in HTML. Full version in PDF.
99f
Lewis, Jr., D. H., Janson, S. W., Cohen, R. B., and Antonsson, E. K.
Digital MicroPropulsion.
In 2nd International Conference on Integrated MicroNano Technology for Space Applications (MNT99) (Pasadena, CA, April 11-15 1999), Aerospace Corporation.
Paper Number 2.06.
Abstract in HTML. Full version in PDF.
99e
Scott, M. J., and Antonsson, E. K.
Compensation and Weights for Trade-offs in Engineering Design: Beyond the Weighted Sum.
ASME Journal of Mechanical Design 127, 6 (2005), 1045–1055.
Abstract in HTML. Full version in PDF.
99d
Lewis, Jr., D. H., Janson, S. W., Cohen, R. B., and Antonsson, E. K.
Digital MicroPropulsion.
Sensors and Actuators A: Physical 80, 2 (2000), 143–154.
Abstract in HTML. Full version in PDF.
99b
Wang, X., Liu, Y., and Antonsson, E. K.
Fitting Functions to Data in High Dimensional Design Space.
In 25th Design Automation Conference (DAC) (Sept. 1999), ASME.
Abstract in HTML. Full version in PDF.
99a
Schleiffer, R., Antonsson, E. K., and Sebastian, H.-J.
Genetic Algorithms in Fuzzy Engineering Design.
In 11th International Conference on Design Theory and Methodology (DTM) (Sept. 1999), ASME.
Abstract in HTML. Full version in PDF.
98s
Scott, M. J.
Formalizing Negotiation in Engineering Design.
PhD thesis, California Institute of Technology, Pasadena, CA, June 1999.
Abstract in HTML. Full version in PDF.
98l
Long, M. K., Burdick, J. W., and Antonsson, E. K.
Design of Compensation Structures for Anisotropic Etching.
In MSM’99, Modeling and Simulation of Microsystems, Semiconductors, Sensors and Actuators (One Kendall Square, Cambridge, MA, U.S.A., Apr. 1999), Applied Computational Research Society.
International Conference on Modeling and Simulation of Microsystems.
Abstract in HTML. Full version in PDF.
98k
Lee, C.-Y., and Antonsson, E. K.
Surface Reconstruction of Etched Contours.
In MSM’99, Modeling and Simulation of Microsystems, Semiconductors, Sensors and Actuators (One Kendall Square, Cambridge, MA, U.S.A., Apr. 1999), Applied Computational Research Society.
International Conference on Modeling and Simulation of Microsystems.
Abstract in HTML. Full version in PDF.
98j
Li, H., and Antonsson, E. K.
Mask-Layout Synthesis Through an Evolutionary Algorithm.
In MSM’99, Modeling and Simulation of Microsystems, Semiconductors, Sensors and Actuators (One Kendall Square, Cambridge, MA, U.S.A., Apr. 1999), Applied Computational Research Society.
International Conference on Modeling and Simulation of Microsystems.
Abstract in HTML. Full version in PDF.
98i
Scott, M. J., and Antonsson, E. K.
Arrow’s Theorem and Engineering Design Decision Making.
Research in Engineering Design 11, 4 (2000), 218–228.
Abstract in HTML. Full version in PDF.
98h
Stix, G.
Little Bangs.
Scientific American 279, 5 (Nov. 1998), 50–51.
Describes the DARPA/TRW Digital Propulsion project, and mentions David Lewis of TRW and Erik Antonsson of Caltech as coinventors.
Abstract in HTML. Full version in PDF.
98g
Lewis, Jr., D. H., Janson, S. W., Cohen, R. B., and Antonsson, E. K.
Digital MicroPropulsion.
In The Twelfth IEEE International Micro Electro Mechanical Systems Conference (Orlando, Florida, Jan. 1999), IEEE.
Abstract in HTML. Full version in PDF.
98e
Long, M. K., Burdick, J. W., and Antonsson, E. K.
Computer Aided Mask-Layout for Bulk Etch Fabrication.
In MSM’98, Modeling and Simulation of Microsystems, Semiconductors, Sensors and Actuators (One Kendall Square, Cambridge, MA, U.S.A., Apr. 1998), Applied Computational Research Society.
International Conference on Modeling and Simulation of Microsystems.
Abstract in HTML. Full version in PDF.
98d
Li, H., and Antonsson, E. K.
Evolutionary Techniques in MEMS Synthesis.
In 25th Biennial Mechanisms Conference (Atlanta, GA, Sept. 1998), ASME.
Special Session on The Mechanical Design Issues in MEMS held at the Design Engineering Technical Conferences.
Abstract in HTML. Full version in PDF.
98c
Li, H., and Antonsson, E. K.
Evolutionary Techniques in MEMS Synthesis.
In ASME International Mechanical Engineering Congress and Exposition (Anaheim, CA, Nov. 1998), ASME.
Abstract in HTML. Full version in PDF.
98a
Scott, M. J., and Antonsson, E. K.
Preliminary Vehicle Structure Design: An Industrial Application of Imprecision in Engineering Design.
In 10th International Conference on Design Theory and Methodology (DTM) (Sept. 1998), ASME.
Abstract in HTML. Full version in PDF.
97g
Antonsson, E. K., and Sebastian, H.-J.
Fuzzy Sets in Engineering Design.
In Practical Applications of Fuzzy Technologies, H.-J. Zimmermann, Ed., Handbooks of Fuzzy Sets Series. Kluwer Academic Publishers, Boston/London/Dordrecht, 1999, ch. 2, pp. 57–117.
Abstract in HTML. Full version in PDF.
97f
Li, G., Hubbard, T., and Antonsson, E. K.
SEGS: On-line Etch Simulator.
In MSM’98, Modeling and Simulation of Microsystems, Semiconductors, Sensors and Actuators (One Kendall Square, Cambridge, MA, U.S.A., Apr. 1998), Applied Computational Research Society.
International Conference on Modeling and Simulation of Microsystems.
Abstract in HTML. Full version in PDF.
97e
Antonsson, E. K.
Imprecision, Trade-Offs and Negotiation in Engineering Design.
In 1998 NSF Design and Manufacturing Systems Grantees Conference (Monterrey, Mexico, Jan. 1998), NSF.
Abstract in HTML. Full version in PDF.
97d
Antonsson, E. K.
Imprecision in Engineering Design.
In IDEA’97 - Intelligent Design in Engineering Applications Symposium at the 5th European Congress on Intelligent Techniques and Soft Computing - EUFIT’97 (Aachen, Germany, Sept. 1997), H.-J. Zimmermann, Ed., Deutsche Gesellschaft für Operations Research e.V.
Abstract in HTML. Full version in PDF.
97b
Scott, M. J., Law, W. S., and Antonsson, E. K.
A Fuzzy Sets Application to Preliminary Passenger Vehicle Structure Design.
In Handbook of Fuzzy Computation, E. Ruspini, P. Bonissone, and W. Pedrycz, Eds. Oxford University Press, May 1998.
Abstract in HTML. Full version in PDF.
97a
Scott, M. J., Kaiser, R. W., Dilligan, M., Glaser, R. J., and Antonsson, E. K.
Managing uncertainty in Preliminary Aeroshell Design Analysis.
In 9th International Conference on Design Theory and Methodology (DTM) (Sept. 1997), ASME.
Abstract in HTML. Full version in PDF.
96n
Antonsson, E. K., Ed.
Structured Design Methods for MEMS (Caltech, Pasadena, CA, Oct. 1996), Workshop Report, National Science Foundation, Computer and Information Science and Engineering Directorate, Microelectronics Information Processing Systems Division.
http://www.design.caltech.edu/NSF_MEMS_Workshop/.
Abstract in HTML. Full version in PDF.
96l
Law, W. S.
Evaluating Imprecision in Engineering Design.
PhD thesis, California Institute of Technology, Pasadena, CA, June 1996.
Abstract in HTML. Full version in PDF.
96i
Antonsson, E. K.
The Potential for Mechanical Design Compilation.
Research in Engineering Design 9, 4 (1997), 191–194.
Abstract in HTML. Full version in PDF.
96g
Hsueh, W.-J., and Antonsson, E. K.
Automatic High-Resolution Optoelectronic Photogrammetric 3D Surface Geometry Acquisition System.
Machine Vision and Applications 10, 3 (1997), 98–113.
Abstract in HTML. Full version in PDF.
96c
Scott, M. J., and Antonsson, E. K.
Formalisms for Negotiation in Engineering Design.
In 8th International Conference on Design Theory and Methodology (DTM) (Aug. 1996), ASME.
Abstract in HTML. Full version in PDF.
96b
Antonsson, E. K., and Otto, K. N.
Improving Engineering Design with Fuzzy Sets.
In Fuzzy Information Engineering: A Guided Tour of Applications, D. Dubois, H. Prade, and R. R. Yager, Eds. John Wiley & Sons, 1997, ch. 38, pp. 633–654.
Abstract in HTML. Full version in PDF.
96a
Law, W. S., and Antonsson, E. K.
Multi-dimensional Mapping of Design Imprecision.
In 8th International Conference on Design Theory and Methodology (DTM) (Aug. 1996), ASME.
Abstract in HTML. Full version in PDF.
95s
Sebastian, H.-J., and Antonsson, E. K., Eds.
Fuzzy Sets in Engineering Design and Configuration.
Kluwer Academic Publishers, Boston, London, 1996.
Abstract in HTML. Full version in PDF.
95h
Wells, A. B., and Antonsson, E. K.
An Engineering Grammar for Robot Arm Design.
Research in Engineering Design (1995).
In preparation.
Abstract in HTML. Full version in PDF.
95g
Hubbard, T. J., and Antonsson, E. K.
Design of MEMS via Efficient Simulation of Fabrication.
In Design for Manufacturing Conference (New York, Aug. 1996), ASME.
Abstract in HTML. Full version in PDF.
95f
Scott, M. J., and Antonsson, E. K.
Aggregation Functions for Engineering Design Trade-offs.
Fuzzy Sets and Systems 99, 3 (Nov. 1998), 253–264.
Abstract in HTML. Full version in PDF.
95e
Antonsson, E. K., Otto, K. N., and Wood, K. L.
Modeling Imprecision in Engineering Design.
In Fuzzy Sets in Engineering Design and Configuration, H.-J. Sebastian and E. K. Antonsson, Eds. Kluwer, 1996, pp. 1–52.
Abstract in HTML. Full version in PDF.
95d
Scott, M. J., Law, W. S., and Antonsson, E. K.
Design Negotiation in Industry.
Presented at the JSME/ASME Workshop on Design Technologies at the Seventh International ASME Conference on Design Theory and Methodology (DTM), Boston, MA, September 17, 1995, Sept. 1995.
Abstract in HTML. Full version in PDF.
95b
Scott, M. J., and Antonsson, E. K.
Aggregation Functions for Engineering Design Trade-offs.
In 9th International Conference on Design Theory and Methodology (DTM) (Sept. 1995), vol. 2, ASME, pp. 389–396.
Abstract in HTML. Full version in PDF.
95a
Law, W. S., and Antonsson, E. K.
Optimization Methods for Calculating Design Imprecision.
In Advances in Design Automation - 1995 (Sept. 1995), vol. 1, ASME, pp. 471–476.
Abstract in HTML. Full version in PDF.
94n
Mukherjee, A., and Hilibrand, J., Eds.
New Paradigms for Manufacturing (Arlington, VA, May 1994), no. NSF 94-123 in Workshop Report, National Science Foundation, Computer and Information Science and Engineering Directorate, Microelectronics Information Processing Systems Division.
E. Antonsson contributed several sections of this report.
Abstract in HTML. Full version in PDF.
94i
Law, W. S., and Antonsson, E. K.
Hierarchical Imprecise Design with Weights.
In Proceedings of the Fourth IEEE International Conference on Fuzzy Systems (FUZZ-IEEE/IFES’95) (Mar. 1995), vol. 1, IEEE, pp. 383–388.
Abstract in HTML. Full version in PDF.
94h
Hubbard, T. J.
MEMS Design: The Geometry of Silicon Micromachining.
PhD thesis, California Institute of Technology, Pasadena, CA 91125, July 1994.
Abstract in HTML. Full version in PDF.
94g
Antonsson, E. K., and Otto, K. N.
Imprecision in Engineering Design.
ASME Journal of Mechanical Design 117(B) (June 1995), 25–32.
Invited paper. Special Combined Issue of the Transactions of the ASME commemorating the 50th anniversary of the Design Engineering Division of the ASME.
Abstract in HTML. Full version in PDF.
94f
Hubbard, T. J., and Antonsson, E. K.
Shape Modeling in MEMS Design.
Engineering Design Research Laboratory Report EDRL-TR 94f, California Institute of Technology, 1992.
Abstract in HTML. Full version in PDF.
94e
Hubbard, T. J., and Antonsson, E. K.
Etch Rate Modeling in MEMS Design.
In Design for Manufacturing Conference (Aug. 1996), ASME.
Abstract in HTML. Full version in PDF.
94d
Hubbard, T. J., and Antonsson, E. K.
Cellular Automata in MEMS Design.
Sensors and Materials 9, 7 (1997), 437–448.
Abstract in HTML. Full version in PDF.
94c
Hubbard, T. J., and Antonsson, E. K.
Compensation Tuning.
Engineering Design Research Laboratory Report EDRL-TR 94c, California Institute of Technology, 1992.
Abstract in HTML. Full version in PDF.
94b
Hubbard, T. J., and Antonsson, E. K.
Compensation Simulation and Optimization.
Engineering Design Research Laboratory Report EDRL-TR 94b, California Institute of Technology, 1992.
Abstract in HTML. Full version in PDF.
94a
Law, W. S., and Antonsson, E. K.
Including Imprecision in Engineering Design Calculations.
In Design Theory and Methodology – DTM ’94 (Sept. 1994), vol. DE-68, ASME, pp. 109–114.
Abstract in HTML. Full version in PDF.
93h
Hsueh, W.-J.
High-Resolution Optoelectronic and Photogrammetric 3-D Surface Geometry Acquisition and Analysis.
PhD thesis, California Institute of Technology, Pasadena, CA, May 1993.
Abstract in HTML. Full version in PDF.
93d
Otto, K. N., and Antonsson, E. K.
Propagating Imprecise Engineering Design Constraints.
In Proceedings of the Fourth IEEE International Conference on Fuzzy Systems (FUZZ-IEEE/IFES’95) (Mar. 1995), vol. 1, IEEE, pp. 375–382.
Abstract in HTML. Full version in PDF.
93c
Law, W. S., and Antonsson, E. K.
Implementing the Method of Imprecision: An Engineering Design Example.
In Proceedings of the Third IEEE International Conference on Fuzzy Systems (FUZZ-IEEE ’94) (June 1994), vol. 1, IEEE, pp. 358–363.
Invited paper.
Abstract in HTML. Full version in PDF.
93b
Otto, K. N., and Antonsson, E. K.
Modeling Imprecision in Product Design.
In Proceedings of the Third IEEE International Conference on Fuzzy Systems (FUZZ-IEEE ’94) (June 1994), vol. 1, IEEE, pp. 346–351.
Invited paper.
Abstract in HTML. Full version in PDF.
93a
Antonsson, E. K.
Convergent Iteration in Engineering Design.
In 1994 NSF Design and Manufacturing Systems Grantees Conference (Jan. 1994), NSF, pp. 3–4.
Abstract in HTML. Full version in PDF.
92o
Otto, K. N.
A Formal Representational Theory for Engineering Design.
PhD thesis, California Institute of Technology, Pasadena, CA, June 1992.
Abstract in HTML. Full version in PDF.
92d
Otto, K. N., and Antonsson, E. K.
The Method of Imprecision Compared to Utility Theory for Design Selection Problems.
In Design Theory and Methodology – DTM ’93 (Sept. 1993), ASME, pp. 167–173.
Abstract in HTML. Full version in PDF.
92c
Hubbard, T. J., and Antonsson, E. K.
Emergent Faces in Crystal Etching.
Journal of Microelectomechanical Systems 3, 1 (Mar. 1994), 19–28.
Abstract in HTML. Full version in PDF.
92b
Antonsson, E. K.
Convergent Iteration in Engineering Design.
In 1993 NSF Design and Manufacturing Systems Grantees Conference (Jan. 1993), NSF.
Abstract in HTML. Full version in PDF.
92a
Hsueh, W.-J., and Antonsson, E. K.
An Optoelectronic and Photogrammetric 3-D Surface Geometry Aquisition System.
In Proceedings of the ASME Winter Annual Meeting (Nov. 1992), ASME.
Session on Instrumentation and Components for Mechanical Systems.
Abstract in HTML. Full version in PDF.
91k
Otto, K. N., Lewis, A. D., and Antonsson, E. K.
Determining optimal points of membership with dependent variables.
Fuzzy Sets and Systems 60, 1 (Nov. 1993), 19–24.
Abstract in HTML. Full version in PDF.
91j
Otto, K. N., Lewis, A. D., and Antonsson, E. K.
Approximating α-cuts with the Vertex Method.
Fuzzy Sets and Systems 55, 1 (Apr. 1993), 43–50.
Abstract in HTML. Full version in PDF.
91h
Otto, K. N., and Antonsson, E. K.
Research on Engineering Design at Caltech.
In 1992 NSF Design and Manufacturing Systems Grantees Conference (Jan. 1992), NSF.
Abstract in HTML. Full version in PDF.
91g
Otto, K. N., and Antonsson, E. K.
Research on Imprecision Methods for Quality Engineering Design at Caltech.
Fuzzy Sets and Systems 44, 3 (Dec. 1991), 471–473.
Abstract in HTML. Full version in PDF.
91f
Otto, K. N., Lewis, A. D., and Antonsson, E. K.
Membership Induced on Manifolds by Vector Fields and Flows.
Fuzzy Sets and Systems 70, 1 (1995), 15–29.
Abstract in HTML. Full version in PDF.
91e
Otto, K. N., and Antonsson, E. K.
Trade-Off Strategies in the Solution of Imprecise Design Problems.
In Fuzzy Engineering toward Human Friendly Systems: Proceedings of the International Fuzzy Engineering Symposium ’91, Volume 1 (Yokohama, Japan, Nov. 1991), T. Terano et al., Eds., LIFE, IFES, pp. 422–433.
Abstract in HTML. Full version in PDF.
91b
Wood, K. L., Otto, K. N., and Antonsson, E. K.
Engineering Design Calculations with Fuzzy Parameters.
Fuzzy Sets and Systems 52, 1 (Nov. 1992), 1–20.
Abstract in HTML. Full version in PDF.
91a
Otto, K. N., and Antonsson, E. K.
Tuning Parameters in Engineering Design.
ASME Journal of Mechanical Design 115, 1 (Mar. 1993), 14–19.
Abstract in HTML. Full version in PDF.
90g
Otto, K. N., and Antonsson, E. K.
Design Parameter Selection in the Presence of Noise.
Research in Engineering Design 6, 4 (1994), 234–246.
Abstract in HTML. Full version in PDF.
90f
Otto, K. N., and Antonsson, E. K.
Extensions to the Taguchi Method of Product Design.
ASME Journal of Mechanical Design 115, 1 (Mar. 1993), 5–13.
Abstract in HTML. Full version in PDF.
90e
Otto, K. N., and Antonsson, E. K.
Trade-Off Strategies in Engineering Design.
Research in Engineering Design 3, 2 (1991), 87–104.
Abstract in HTML. Full version in PDF.
90d
Otto, K. N., and Antonsson, E. K.
Representing and Manipulating Uncertainties in Preliminary Engineering Design.
In 1991 NSF Design and Manufacturing Systems Grantees Conference (Jan. 1991), NSF.
Abstract in HTML. Full version in PDF.
89w
Wood, K. L.
A Method for Representing and Manipulating Uncertainties in Preliminary Engineering Design.
PhD thesis, California Institute of Technology, Pasadena, CA, 1989.
Abstract in HTML. Full version in PDF.
89c
Wood, K. L., Otto, K. N., and Antonsson, E. K.
A Formal Method for Representing Uncertainties in Engineering Design.
In First International Workshop on Formal Methods in Engineering Design (Fort Collins, Colorado, Jan. 1990), P. Fitzhorn, Ed., Colorado State University, pp. 202–246.
Abstract in HTML. Full version in PDF.
89b
Wood, K. L., and Antonsson, E. K.
Engineering Design Uncertainties.
In 1989 NSF Engineering Design Research Conference (June 1989), J. E. A. John, Ed., NSF.
1989 NSF Grantee Workshop on Design Theory and Methodology.
Abstract in HTML. Full version in PDF.
89a
Wood, K. L., Antonsson, E. K., and Beck, J. L.
Comparing Fuzzy and Probability Calculus for Representing Imprecision in Preliminary Engineering Design.
In Design Theory and Methodology - 1989 (New York, Sept. 1989), W. P. Seering, Ed., ASME, pp. 99–105.
Presented at the First International ASME Design Theory and Methodology Conference (DTM ’89), September 18-19, 1989, Montréal, Canada.
Abstract in HTML. Full version in PDF.
88f
Wood, K. L., Antonsson, E. K., and Beck, J. L.
Representing Imprecision in Engineering Design – Comparing Fuzzy and Probability Calculus.
Research in Engineering Design 1, 3/4 (1990), 187–203.
Abstract in HTML. Full version in PDF.
88e
Wood, K. L., and Antonsson, E. K.
Modeling Imprecision and Uncertainty in Preliminary Engineering Design.
Mechanism and Machine Theory 25, 3 (Feb. 1990), 305–324.
Invited paper.
Abstract in HTML. Full version in PDF.
88d
Wood, K. L., and Antonsson, E. K.
A First Class of Computational Tools for Preliminary Engineering Design.
In Advances in Design Automation - 1988, DE-Vol. 14 (New York, Sept. 1988), S. S. Rao, Ed., ASME, pp. 473–476.
Abstract in HTML. Full version in PDF.
88c
Wood, K. L., and Antonsson, E. K.
Computational Tools for Preliminary Engineering Design.
In Design Theory ’88 (New York, 1989), S. L. Newsome, W. R. Spillers, and S. Finger, Eds., Springer-Verlag, Springer-Verlag, p. 297.
Proceedings of the 1988 NSF Grantee Workshop on Design Theory and Methodology, RPI, Troy, NY, June, 1988.
Abstract in HTML. Full version in PDF.
88a
Wood, K. L., and Antonsson, E. K.
Computations with Imprecise Parameters in Engineering Design: Background and Theory.
ASME Journal of Mechanisms, Transmissions, and Automation in Design 111, 4 (Dec. 1989), 616–625.
Abstract in HTML. Full version in PDF.
87b
Antonsson, E. K.
Development and Testing of Hypotheses in Engineering Design Research.
ASME Journal of Mechanisms, Transmissions, and Automation in Design 109, 2 (June 1987), 153–154.
Abstract in HTML. Full version in PDF.
87a
Wood, K. L., and Antonsson, E. K.
A Fuzzy Sets Approach to Computational Tools for Preliminary Engineering Design.
In Advances in Design Automation - 1987, Volume One: Design Methods, Computer Graphics, and Expert Systems – DE-Vol. 10-1 (New York, Sept. 1987), S. S. Rao, Ed., ASME, pp. 263–271.
Abstract in HTML. Full version in PDF.
89m
Antonsson, E. K., and Mann, R. W.
Automatic 6-D.O.F. kinematic trajectory acquisition and analysis.
ASME Journal of Dynamic Systems, Measurement and Control 111, 1 (Mar. 1989), 31–39.
Abstract in HTML. Full version in PDF.
85d
Antonsson, E. K., and Mann, R. W.
The Frequency Content of Gait.
Journal of Biomechanics 18, 1 (1985), 39–47.
Abstract in HTML. Full version in PDF.
84a
Antonsson, E. K., and Mann, R. W.
A Three-Dimensional Kinematic Acquisition and Intersegmental Dynamic Analysis System for Human Motion.
In Proceedings of the Fourth Meeting of the European Society of Biomechanics (Davos, Switzerland, Sept. 1984), p. 133.
Abstract in HTML. Full version in PDF.
83a
Mann, R. W., and Antonsson, E. K.
Gait Analysis – Precise, Rapid, Automatic, 3-D Position and orientation Kinematics and Dynamics.
Bulletin of the Hospital for Joint Diseases Orthopaedic Institute XLIII, 2 (1983), 137–146.
Abstract in HTML. Full version in PDF.
83b
Antonsson, E. K.
Three-Dimensional Kinematic Acquisition and Intersegmental Dynamic Analysis System for Human Motion.
In Proceedings of the 1983 ASME Biomechanics Symposium (Houston, Texas, June 1983), pp. 51–52.
Abstract in HTML. Full version in PDF.
83c
Mann, R. W., Rowell, D., Dalrymple, G., Conati, F., Tetewsky, A., Ottenheimer, D., and Antonsson, E. K.
Precise, Rapid, Automatic 3-D Position and Orientation Tracking of Multiple Moving Bodies.
In Biomechanics VIII, H. Matsui and K. Kobayashi, Eds. Human Kinetics Publishers, Champaign, IL, 1983.
Abstract in HTML. Full version in PDF.
82a
Antonsson, E. K.
A Three-Dimensional Kinematic Acquisition and Intersegmental Dynamic Analysis System for Human Motion.
PhD thesis, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, June 1982.
Department of Mechanical Engineering.
Abstract in HTML. Full version in PDF.
80a
Antonsson, E. K., and Mann, R. W.
Quantitative Three-Dimensional Dynamic Analysis of Human Movement.
In Proceedings of the 8th Annual Northeast Bioengineering Conference (Cambridge, MA 01239, Mar. 1980), Massachusetts Institute of Technology, p. 187.
Abstract in HTML. Full version in PDF.
79a
Antonsson, E. K., and Mann, R. W.
Automatic 3-D Gait Analysis Using a Selspot Centered System.
In 1979 Advances in Bioengineering (New York, 1979), ASME, p. 51.
Abstract in HTML. Full version in PDF.
78a
Antonsson, E. K.
The Derivation and Implementation of a Dynamic Three-Dimensional Linkage Analysis Technique.
Master’s thesis, Massachusetts Institute of Technology, Cambridge, MA 01239, June 1978.
Department of Mechanical Engineering.
Abstract in HTML. Full version in PDF.
77a
Dueland, R., Bartel, D., and Antonsson, E. K.
Force-Plate Technique for Canine Gait Analysis of Total Hip Excision Arthroplasty.
Journal of American Animal Hospital Association 13, 5 (1977), 547–552.
Abstract in HTML. Full version in PDF.